Krups Grind & Brew KM8328, Manual

Page: 15 / 140

15
ENGLISH
USE
BEFORE FIRST USE
When the machine is plugged in main socket:
1. All displayable contents from (G1-G7) appear on the display.
2. The On/Off indicator (H2) lights up.
3. All display contents and the On/Off indicator (H2) flash for 2 seconds, then:
– Display show time 00:00, default cups No. ‘4’ and default coffee strength 2 coffee
beans icon.
– On/Off indicator (H2) switches off.
– Time display (G1) displays 00:00, all four digits flash to invite the user to set the
current time.
CURRENT TIME SETTING
1. Press and hold the Time setting HR button (H6) for around 3 seconds. The first two
digits 00: flash while the last two digits :00 are fixed, you can set the Hour using the
same button (H6). Holding down the button will increase the hour value progressively
faster.
2. When hour value is correct, wait for 5 seconds. The first two digits 00: stop flashing and
fix, the current Hour is memorised.
3. Hold the Time setting MIN button (H7) for around 3 seconds. The last two digits :00
flash (the first two digits for HR 00: stay fixed), you can set the Minute using the same
button (H7). While the button is held down, minute value increases progressively faster.
4. When minute value is selected, wait for 5 seconds. The last two digits :00 become fix,
the current Minute is memorised.
NOTE: Only the Time (24h format) is displayed at this point.
5. The machine is in “Ready to use” status for coffee preparation.
– Always disconnect the appliance from the supply if it is left unattended and
before assembling, disassembling or cleaning.
– This function shall not be used by children. Keep the appliance and its cord
out of reach of children.
– Grinder function can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the grinder function in a
safe way and if they understand the hazards involved.
– Children shall not play with the grinder function.
„
Do not brew coffee if the carafe already has coffee in it.
„
To prevent any overflow, the carafe must be placed on the heated base of the
coffee maker, otherwise there could be some overflow of hot water or hot coffee.
„
The coffee maker becomes very hot during the infusion cycle. Please handle it
with care.
„
Do not disassemble the appliance.
„
Do not use the jug without the lid.
„
Do not pour hot water in the tanks.
„
The coffee-maker shall not be placed in a cabinet when in use.
„
Do not use too oily beans which may damage your appliance.