Krups FDK1, Instructions Manual

Page: 8 / 16

8
English
Thank you for choosing an appliance from the
KRUPS Electrical Cooking assortment,
designed for household use only.
Description
a Non-stick sandwich fixed plates (1)
b Insulated Cool-touch handle
c Locking clip for storage
d On/Off indicator light
e Ready indicator light
Getting started
• Place the appliance on a stable, heat resistant
surface: do not use it on a soft surface such
as a table pad.
Do not place the appliance on or near
slippery or hot surfaces. Do not let the cord
hang down over a source of heat (hot plates,
gas cookers, etc.).
Before using the appliance for the first time:
• Open the appliance.
• Remove any packaging, stickers and
accessories from both inside and outside the
appliance.
• Lightly coat the plates with vegetable oil or
non-stick cooking spray. Wipe with a soft cloth.
Using the appliance
• Close the appliance.
Check that your electrical installation is
compatible with the power and voltage
shown underneath the appliance.
Plug the appliance into an earthed socket only.
If the power supply cord is damaged, it must
be replaced by the manufacturer or its
service agent or a similarly qualified person
in order to avoid a hazard.
• Plug into outlet. The red indicator (d) will
illuminate (2) .
• Allow the appliance to pre-heat: the green
light (e) comes on when the correct cooking
temperature is reached
(3) .
When the appliance is used for the first
time, it may give off a slight odour and
smoke, this is normal.
• Open the appliance and place the food on
the lower plate.
• Close the appliance. The locking clip easily
adjusts to accomodate different food
thickness
(4) .
• Leave the food to cook for the desired time.
• During use it is normal for the light to go on
and off.
Practical hints
• The cooking time varies according to
moisture of bread or the type of filling
involved.
• It is recommended to adapt cooking according
to your own taste.
• When cooking is complete, remove the
sandwich using a wooden spatula.
• Avoid the use of metalic or sharp utensils,
as they will damage the non-stick coating of
the toasting plates.
Cleaning
• Always disconnect the appliance before
cleaning, and leave to cool completely.
• Do not place the appliance in water or under
running water.
• To clean the exterior , wipe with a damp
cloth and dry.
• To clean the interior , wipe the plates with
a damp cloth, some dishwashing soap may
be used. Then wipe with a wet sponge and
dry carefully.
• Do not use metal scouring pads, scouring
powders, or abrasives
when cleaning the
interior or exterior of this appliance.
Storage
The appliance can be stored vertically to save
space. Wind up the cord into the cord storage
area
(5) .
What to do if your appliance
does not work
• Check that the appliance is plugged in
correctly.
If your appliance still does not work ,
consult a KRUPS authorized service center
(see list in KRUPS service booklet).
FDK1 ENG-ESP-FRA 10/03 24/11/03 17:14 Page 8