Krueger | 1401 N Plano Rd | Richardson, TX 75081 | 972.680.9136 | [email protected] | www.krueger-hvac.com
KAH Operation & Maintenance Guide
Page: 42 of 88
FIGURE 43 - SHEAVE ANGULAR ALIGNMENT
ANGULAR ALIGNMENT
MOTOR
BASE
STRAIGHT
EDGE
FIGURE 44 - SHEAVE ANGULAR MISALIGNMENT
SECTION 3 - MAINTENANCE (CONTINUED)
FIGURE 45 - SEALED BEARING
LUBRICATION
Verify the type of bearings before lubricating them as
shown below:
•
Sealed (not to be relubricated in the field) as shown
in Figure 45 (right).
•
Standard Pillow Block as shown in Figure 46 on the
next page.
•
Split Pillow Block as shown in Figure 48 on the next
page.
1. Seal (4)
2. Housing Cap
3. Cap Bolts (2)
4. Locating Ring (2)
5. Lock Nut
6. Lock Washer
7. Tapered Sleeve
8. Bearing
9. Housing Base