Krowne Metal Corporation
• 100 Haul Rd. Wayne, NJ 07470
P: (800) 631-0442 • F: (973) 872-1129
krowne.com
6
Modular Bar Die Installation
Instructions
Install bar counter and removable front millwork panels. It is very important to have the front panels removable to allow access from
the customers side for plumbing, electrical and beverage lines. Our front panels use interlocking panels and hidden screws meaning
they make accessing the underside of the bar very easy and the screws cannot be seen by customers making it a much nicer finish.
Metal Z-clips are attached to the inside of the bar front panel. Z-clips (model KMB-PC) available for purchase.
Slide panel into channel created by two pieces of wood.
END PANELS
9
INSTALLATION (CON’T)
Everything shown in brown is supplied by millworker.
Everything shown in brown is supplied by millworker.
Wood should be 3/4” thick to fit Z-clips
Model
KMB-PC
Stainless Steel Z-CLIPS
with 3/4” offset (24 PACK)
3/4”
1”
2-1/2”
Method A
Method B
