Krowne Metal Corporation
• 100 Haul Rd. Wayne, NJ 07470
P: (800) 631-0442 • F: (973) 872-1129
krowne.com
7
Modular Bar Die Installation
Options
ADA CERTIFIED
Providing an equal opportunity to people with disabilities is the fundamental principle of the American with Disabilities Act.
Krowne embraces this and provides options to have wheel chair accessible modular bar die added as an option.
ADA Requirements for
Foodservice counters and bars
Where food or drink is served at
counters exceeding 34” (865 mm)
in height for consumption by cus-
tomers seated on stools or standing
at the counter, a portion of the main
counter, which is 60”(1525 mm) in
length minimum, shall be provided
in compliance with 34” maximum
counter height and 19” clear depth,
or service shall be available at
accessible tables within the same
area.
OPTIONS
Confirm size with local codes.
36” to 60” depending on local code requirements
BUILT-IN OUTLETS
MYLAR TEMPLATE
LED LIGHTS
Built-in electrical outlet boxes installed per customer’s
request (quantity and location to be specified).
Mylar template can be ordered prior to equipment going into production
and is used to see precise footprint of modular bar equipment.
Template is priced out per linear foot and is sent in sections labeled
A thru Z for ease of layout. Template allows for accurate marking of
floor drain locations and beer/vent lines along with the added benefit
of spatially visualizing your future bar. Mylar sections are sent in up to
200” in length.
Illuminate your bar with down acting LED lights. Color options include
crisp white, warm white, blue, green, cyan, and red. Power supply may
also be purchased with LED lights.
36”
