- 4 -
Notice:
the Canadian Department of communications label identifies certified equipment. This certification means
that the equipment meets certain telecommunications network protective operational and safety requirements. The
Department does not guarantee that the equipment will operate to the user’s satisfaction. Before installing this equip-
ment, the users should ensure that it is permissible to be connected to the facilities of the local telecommunications
company. In some cases, the company’s inside wiring associated with a single line individual service may be ex-
tended by means of a certified connector assembly (telephone extended cord) The customer should be aware that
compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified
equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or
alteration made by the user to this equipment or equipment malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical
ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are con-
nected together. This precaution may be particularly important in rural areas.
Caution:
Users should not attempt to make such connections themselves, but should contact the appropriate electric
inspection authority, or electrician, as soon as possible.
Notice:
The Ringer Equivalent Number is an indication of the maximum number of terminals allowed to connect to
a telephone interface. The termination on an interface may consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalent Number of all the devices not exceed five.
SAVE THESE INSTRUCTIONS
Safety Instructions for Batteries
Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the
instructions.
1. Use only with the approved battery pack in your Alarm Clock. For base unit 8.4V 170mAh, NiMH rechargeable
battery GPI International Ltd.: 17R8H
2. Do not dispose of the battery in a fire as it may explode. Check with local codes for possible special disposal
instructions.
3. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes and
skin. It may be toxic if swallowed.
4. Exercise care in handling batteries in order not to short the battery with conducting materials such as rings,
bracelets and keys. The battery or conducting material may overheat and cause burns.
5. Charge the battery (ies) provided with or identified for use with this product only in accordance with the instruc-
tions and limitations specified in this manual.
6. Observe proper polarity orientation between the battery pack and the battery charger.
CONSUMER INFORMATION
a) This equipment complies with Part 68 of the FCC rules and the requirements adopted
by the ACTA. On the bottom of this equipment is a label that contains, among other
information, a product identifier in the format US:AAAEQ##TXXXX. If requested,
this number must be provided to the telephone company.
b) An applicable certification jacks Universal Service Order Codes (USOC) for the equip-
ment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal
equipment.
c) A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug is provided with this prod-
uct. It is designed to connect to a compatible modular jack that is also compliant. See
installation instructions for details.
