- 14 -
Note: * Do not block the smoke chamber on smoke detector. Install the transmitter
on the siren side.
* Test the system by pressing the test button on the fire alarm to make sure
that the fire alarm and the transmitter work. Do not press test button on the
transmitter to test the system.
G. Weather Alert Transmitter (KWA300TX):
Choose the event you want to alert on the weather radio (WR300). For example, setup the
radio to turn on the siren when a tornado is coming or when your local evacuation signal
generated. Choose a channel by setting the jumper on the transmitter and register it with
the clock or the KA300RX. Plug this weather alert transmitter to a weather alert radio and
turn it on. Test the operation of the transmitter by pressing the test button. Check the clock
and KA300 to make sure the correct channel is displayed.
Note: If the alert device does not have 3.5mm direct output for an external audio, use
the KA300TX and install it on top of the siren.
H. Alarm Monitor Receiver (KA300RX):
The KA300 wireless alarm monitor system is designed to link all of the alarms in your
house together. It works with the KA1000 dual alarm clock with bed shaker and table
lamp. The KA300RX receiver comes with very strong flash light 177Cd and 95dB loud
siren. Install the KA300RX in the hallway, living room or kitchen. It activates when any
alarm detector triggers the transmitters. The channel LED on the KA300RX also turns on
to show the activated detector. Each LED comes with different colors for easily distin-
guishing the channel. Backup battery and adaptor are included. The KA300 kit includes
two receivers: KA300RX, KBS300RX, one transmitter: KA300TX, bed shaker, adaptor,
charger, and batteries. Purchasing extra transmitters is recommended for a household with
more than one detector installed. There is no limit to how many detector-transmitters or
receivers you install. Transmitter register is needed at installation.
I. Alarm Monitor bed shaker receiver (KBS300RX):
If the clock is not needed in the bedroom and you would like to have a silent alarm (no
hearing party in your household) when a fire or an emergency alarm is activated, this bed
shaker will be the best choice. It is included when you purchase the KA300 kit. The alarm
channel will be shown by the same LED color as the KA300RX when the sensor triggers
the alarm. A rechargeable battery will keep the bed shaker working in power outage. It
is perfect for your extra bed. Transmitter registration is needed at installation. There is a
built-in time condition filter to prevent a nuisance alarm.
J. Signal Repeater (KA300SR):
To extend the working area for up to 300 feet from the receiver to a transmitter, use this
repeater and install at center of the distance between the transmitter and receiver. Support
for all transmitter of KA300 or KA1000 system. No registration for transmitter is needed,
and an adaptor is included.
