52
7.4
Main Drive Gearbox
Oil Check
Check the gearbox oil after every 500 bales produced.
To do this unscrew the checking screw (2). The oil must
come up to the checking hole.
The main drive gearbox (1) is located in the front cross
carrier in the round baler. When changing the oil or
checking the oil level, dismount the guard on the rear
side of the cross carrier. Bring the round baler into a
horizontal position. The type and quantity of gear oil are
listed in the section "Technical Data".
•
Change the oil only when the round
baler is at a standstill.
•
Switch off the engine and remove
the ignition key.
•
Secure the tractor and the round
baler from rolling away.
•
When the tail gate is open, secure it
with the shut-off tap.
Changing the Oil
The first oil change should be made after the first 500
bales produced. Subsequent oil changes every 2000
bales produced. Unscrew the checking and draining
screws. Collect gear oil (approx. 1 litre) in a suitable
container. Screw in the draining screw and fill with oil
through the checking hole until it just overflows. Screw in
the checking screw.
Dispose of used oil properly!
KR-0-074
1
3
2
Summary of Contents for KR 130 B
Page 7: ...5 ...
