Krone EasyCut 28 Page 39 Operating Instructions Manual Download

Page: 39 / 78

Operation

Pos : 21.14 /BA/Bedienung /Eas yC ut/Weiste-Dreiec k/Abbau Weiste-Drei ec k Bild EC 28/32 @ 10\mod_1221736766364_78.doc @ 136752

AFA-0-010

EC-0-020

Fig. 16:

Pos : 21.15 /BA/Bedienung /Eas yC ut/Weiste-Dreiec k/Abbau Weiste-Drei ec k T ext EC 28/32 28/32CV @ 10\mod_1221736705176_78.doc @ 136733

•

Bring the front mowing unit into the transport position.

•

Remove compensation spring (2) and hang it on hook (1).

•

Lower front-mounted disc mower.

•

Pull spring cotter pin (5) out of the Weiste triangle.

•

Release the interlock of the holding triangle.

•

Loosen the guard cloth.

•

Remove the retaining chain (4) of the PTO shaft (3).

•

Remove the PTO shaft (3) from the tractor side and place on the PTO shaft bracket

•

Carefully lower the front hydraulics.

•

Drive carefully out of the holder of the front-mounted disc mower.

Pos : 22 /BA/-----Sei tenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165

Summary of Contents for EasyCut 28















































































Search results

Summary of Contents for EasyCut 28

Reviews:

Related manuals for EasyCut 28

Brands by name

Popular brands

Krone EasyCut 28, Operating Instructions Manual

Search results

Summary of Contents for EasyCut 28

Reviews:

Related manuals for EasyCut 28

Brands by name

Popular brands