Krone EasyCut 28 Page 34 Operating Instructions Manual Download | Manualshive

Page: 34 / 78

background image

Driving and Transport

34

Pos : 19.1 /Übersc hriften/Übersc hriften 1/F-J/F ahr en und Trans port @ 0\mod_1196330049217_78.doc @ 6553

7

Driving and Transport

Pos : 19.2 /BA/Sicher heit/Fahren und Transport/Mitfahr en/Gefahr Str aßenfahrt, Mitfahren Eas yC ut Fr ont @ 3\mod_1204784303933_78.doc @ 72994

Danger! - Transport / road travel

Effect: Danger to life, serious injuries or serious damage to the machine.
•

Before swivelling the machine up into transport position, switch off the PTO.

•

Wait until machine stops

•

When travelling on public roads, observe the applicable current regulations (lighting,
identification, axle loads, permitted front end dimension, etc.)!

•

When being transported on public roads, the mowing unit must be lifted.

•

It is forbidden to carry passengers on the machine.

•

Before starting, ensure that you have perfect visibility on and around the tractor and the
machine.

Pos : 19.3 /BA/Sicher heit/Fahren und Transport/Abs perrhahn/Transport / Straßenfahrt Abs perr hahn in Fronthydr auli k Traktors eitig sc hließ en @ 33\mod_1254118215456_78.doc @ 318342

DANGER! - Transport / road travel

Effect: Danger to life, serious injuries or serious damage to the machine.
•

A shut-off valve must be existent in the hydraulic line for the front hydraulic of the tractor.

•

The shut-off valve must always be locked during transport / road travel.

Pos : 19.4 /Übersc hriften/Übersc hriften 2/A-E/Beleuc htung @ 0\mod_1195658399935_78.doc @ 1881

7.1

Lighting

Pos : 19.5 /BA/Sicher heit/Fahren und Transport/Beleuc htung/Bel euchtungsanlag e alle M asc hinen @ 7\mod_1215519058839_78.doc @ 103206

Danger! - Lighting system

Effect: Danger to life, serious injuries or serious damage to the machine.
•

Before transporting on public roads, always connect the lighting system and perform a
function check.

•

Keep the lighting system clean. Soiled lights and spotlights impair road safety.

•

Replace defective light bulbs or broken spotlights.

•

When transporting on public highways, the machine must be in the transport position.

Pos : 19.6 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165

«
...
32
33
34
35
36
...
»

Summary of Contents for EasyCut 28















































































Reviews:

No comments

Related manuals for EasyCut 28

Brand: P.Lindberg Pages: 47

Brand: Toro Pages: 52

Brand: Yard-Man Pages: 11

Brand: Ferris Pages: 60

Brand: Rotomec Pages: 40

Brand: Land Pride Pages: 2

Brand: MTD Pages: 37

CZT ELITE Series

Brand: Bad Boy Pages: 48

Brand: VonHaus Pages: 20

Brand: Land Pride Pages: 58

Brand: Yard Pro Pages: 92

Brand: Poulan Pro Pages: 48

Brand: Brill Pages: 96

ZT13536, ZT17542B, ZT20050

Brand: Swisher Pages: 28

Brand: Jacobsen Pages: 134

Brand: Cub Cadet Pages: 44

Brand: Husqvarna Pages: 24

Brand: Husqvarna Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands