Krone EasyCut 28 Operating Instructions Manual Download Page 52

Page: 52 / 78

Maintenance

Pos : 27.25.1 /Ü berschriften/Ü berschriften 2/K-O/Ölstands kontroll e und Ölwec hs el am Mähhol m @ 0\mod_1197017549815_78.doc @ 15963

10.8

Oil level check and oil change on the cutter bar

Pos : 27.25.2 /BA/Sic herheit/Gefahrenhinweise/Mähwerke/Sc hnell rotier ende Messer teller /Mess ertr ommel n_1 @ 0\mod_1197017696736_78.doc @ 16001

Danger!

Rapidly rotating cutting discs/blade drums.

Effect: Danger to life or serious injuries.

•

Switch off the engine and remove the ignition key.

•

The cutting discs/blade drums continue to run!

•

Do not leave the driver’s cab until the cutting discs/blade drums have
come to a complete stop.

Pos : 27.25.3 /Ü berschriften/Ü berschriften 3/K-O/M ähholm ausric hten @ 0\mod_1197017956815_78.doc @ 16042

10.8.1

Aligning the Cutter Bar

Pos : 27.25.4 /BA/Wartung/Mähwerke/M ähhol m ausric hten Eas yC ut @ 3\mod_1204721803648_78.doc @ 72358

EC-0-001

Fig. 24:

Oil level check

•

Align the cutter bar using a spirit level (1).

Crosswise

•

Lay the spirit level on top of the cutting disc hub parallel to the direction of travel.

Lengthwise

•

Lay the spirit level (1) on top of two mower discs.

Pos : 27.25.5 /BA/-----Seitenumbruc h------ @ 0\mod_1196175311226_0.doc @ 4165

Summary of Contents for EasyCut 28















































































Search results

Summary of Contents for EasyCut 28

Reviews:

Brands by name

Popular brands

Krone EasyCut 28, Operating Instructions Manual

Search results

Summary of Contents for EasyCut 28

Reviews:

Brands by name

Popular brands