21
The wheels have a quick-release mecha-
nism that makes it easy to mount and
remove them. The wheels have a tyre and
inner tube fitted with a car-tyre valve,
which makes it easy to inflate them. The
air pressure should be 37 PSI (250 kPa).
1
Insert the axle through the central hole
in the wheel. Remember that the axle
has been greased, so be careful not to get
grease stains on clothes or other items.
2
Press the wheel and the axle into the cas-
sis until you hear a click. The quick-release
mechanism is now engaged, and the wheel
is correctly mounted.
See Figure A
.
3
Ensure that the wheel is correctly mount-
ed by gripping it and pulling outwards.
Carry out this check every time you mount
the wheels.
4
Remove a wheel by depressing the button
that is located in its centre and pulling the
wheel outwards.
See Figure B
.
5
Mount and fix all four wheels.
Mount the wheels
Unfold the pushchair
1
Be aware of the risk of entrapment when
you unfold the sulky. Keep children away
from the product when you unfold the
sulky.
2
Start by depressing the two buttons on the
jointed part of the handle and at the same
time unfolding the handle.
See Figure A
.
3
Open the chassis by pulling the handle
upwards and backwards until you hear a
click.
See Figure D
.
EN
Instructions for assembly
Step by step
Ensure that all locking
devices are engaged
before use.
WARNING
Ensure that all four
wheels are properly
mounted before using
the pushchair.
WARNING
