25
EN
Washing instructions
1
Open the three fasteners under the push-
chair and the buckle under the seat.
2
Open the six press-button fasteners for the
hood and upholstery (three on each side)
below the jointed part of the handle, and
the four press-button fasteners at the sides
of the seat area (two on each side).
3
Remove the straps of the back support from
the chassis.
4
Open the hook-and-loop tape at the top of
the rear edge of the back support, and open
the zips. Now remove the back-support
sheet from the fabric.
5
Open the hook-and-loop tape under the
seat and then remove the seat sheet.
6
Remove the fabric from the seating frame.
Upholstery
Upholstery
1
Insert the back-support sheet and seat
sheet.
2
Insert the 5-point harness.
3
Attach the straps for adjusting the back
support, the two-way strap, and the hook-
and-loop tapes onto the chassis. Note that
the straps for adjusting the back support
are to be located between the lowermost
two press-button fasteners.
4
Attach the six press-button fasteners below
the jointed part of the handle (three on
each side).
5
Attach the four press-button fasteners at
the sides of the seat area (two on each side).
6
Attach the click-closure buckle under the
pushchair.
See Figure L
.
7
Attach the fabric onto the frame.
Refitting the upholstery