KROMA
TELECOM
PROFESSIONAL MONITORS BM5309
BM5309
18
Once selected one of the options the symbols (_ _ _) located in the right hand of
the lower part of the screen going to indicate the value of the state of the variable.
If the CAL key is pressed again then will be stored the last current value, the
dashed lines appear again and one may select another variable.
On the other hand, if ESC key is also pressed, will store the modified value of the
variable but it will return to the previous menu.
6.4.2. Option: MENU CALIBRATION VALUES
In this menu we could modify the associate parameters to the primary controls of
the monitor.
The menu from wich one we could modify the parameters is the following one:
CALIBRATION VALUES MENU
BLCK
SAT
CNTR HUE
VOL
APT
- - -
Figure 8
The operation is the same as in the previous case, the dashed lines, of the right
hand in lower part of screen, when pressing CAL, they will give the values of the
variable. However, there are parameters with some particularities that are kept in
mind:
1.
The Saturation (SAT):
The monitor detects if you are viewing a (PAL, NTSC
or SECAM) system signal, in whose case will modify the associate parameter to
this system. In any other case always the parameters represent the saturation.
2.
The Volume
(VOL):
Although functions exist associated to the VOL key, the
system of control won't give you access to this variable, except for the monitor
carries incorporate the audio digital input option.
3.
The Hue Optión
: It will only has access, if the active input signal is NTSC.
4.
The Aperture (APT):
it will only give access to modify their value if the
monitor incorporates the option.
5.
Option:
GEOMETRY SET UP
