KROMA
TELECOM
PROFESSIONAL MONITORS BM5309
BM5309
27
With the first option "VOLUME CONTROL", the"VOL" key and with the "ORE" will
become a volume control of the ouput audio.
When we select the second option "AUDIO ACCESS EMBEDED MENU", the
"VOL" key will allow us to see the group or groups and channels in each group
where there are audio. If the symbol that appear is red color it indicates that the
signal of audio present is stereo and if the signal is green is monoaural.
"AUDIO OUTPUT SELECTION" allows to switch a pair of channels, previously
selected in “EMBEDDED AUDIO” menu. It affects to the analog and to the digital
(AES-EBU) output.
The other two options allow to switch independently the analog and to the digital
output.
6.10.3. Option:MUTE
SYM
By means of this option, the “Mute Symbol” can be activated, it must appear in the
screen while in the embedded audio option any output is in MUTE position or the
volume level is 0.
The possible positions are: NO ACTIVE and ON - OFF
6.10.4. Option: SYNC (Option not available in BM5314A13 monitor)
This option allows you to select the sync level. You could choose "BLACK BURST"
or with a “4 Vpp” standard sync signal.
6.10.5. Option
GRID
This option allows to generate a chess of white squares on the picture. Its
functionality is an approach in order to hide partially pictures with a reserved
content .
You will be allowed that the CAL key can activate this option at the time that it
chooses with ORE one of the three sizes of the square (2, 4, 8 or OFF mode),
finally this function will be activated pressing CAL key.
This function is conditioned to the "Safe Area," operation, since it is actived under
the same conditions. However, the "Safe Area" have more priority and it will block
the representation of the "chess" if it is activated.
As difference from other options this can not been configured as static, for this
reason it has to be activated every time when you switch on the monitor.
6.11. Option: EMBEDDED AUDIO
In this menu we obtain data/information relative to the audio that is inserted in the
signal, in this graph we can see the number of channels occupied by group and if these
are stereo or mono according to the color (Reed - stereo & Green - mono).
