KROMA
TELECOM
PROFESSIONAL MONITORS BM5309
BM5309
12
4.4. HUE/TINT (NTSC only)
Similar behavior to the described for BLCK concerning to the chrominance
phase regarding to the
burst
in the decoder. Because is a parameter of the
NTSC system will only be permitted their modification when the active
signal corresponds to this system.
The messages that could appear are:
HUE 00 CAL or HUE -3 UNCAL
Or:
NO AVAILABLE If the conecting signal is not NTSC
4.5. APT/VOL (APT/VOLUME)
This key is programmable in BM5309A13 model with the function "PROG.
FUNCTION". See menu STS, when is selected S1, S2 digital input.
If this key in a monitor not equipped with this option is pulsed will appear
the message: NO AVAILABLE.
When a CCVS video input is selected in BM5309A12 model, this key allows to
control the signal aperture.
4.6. CAL Key
Two operating modes:
1. When CAL is pressed, being in one of the modes: BLCK, CNTR, APT,
HUE or SAT,the behavior is the described already.
2. The monitor utilizes different menus on those that there is diverse
active options. With the ORE select the option and with the CAL key executes the
selected option.
3. In Calibration of values in SETUP MANUAL.
APT
VOL
HUE
CAL
