KROMA
TELECOM
PROFESSIONAL MONITORS BM5309
BM5309
19
By means of this menu could be modified the parameters in relation to the format
of the picture, and another with more technical content.
The menu through the one will be able to carry out the change is the following:
GEOMETRY SET UP
HEIGHT N 4:3
WIDTH N 4:3
HEIGHT U/S 4:3
WIDTH U/S 4:3
TRAPEZIUM
HEIGHT N 16:9
WIDTH N 16:9
HEIGHT U/S 16:9 WIDTH U/S 16:9
V. LINEARITY
CORNER
V- S ADJ
H-COMPENSATION
E-W PARAB
H-PHASE
V-SHIFT
H-SHIFT
V-COMPENSATION BEAM LIMIT
Figure 9
In order to modify a parameter, this will be selected, with the ORE help, and we
press CAL key, then will appear in the lower line of the menu: the name and the
value of the parameter, at the moment it is updated in the monitor. In the same
way that in the previous menu, the operation of both keys CAL and ESC are the
same.
This option provides access to the adjustment of all the variables involved with the
monitor geometry alignment.
6.
Option:
CAL
WITH ACTIVE DATA
With this option you will convert all the active parameters values in calibration
values, this option is very suitable after carrying out an adjustment and before of
saving the data in one of the user memories.
During the calibration process will appear in the 2
nd
line of the menu, MANUAL
SET UP MENU the message: "UPDATING."
6.5. Option: CHANGE PASSWORD MENU
This new option allows us to change the access password for the several menus.
When we selected this option, it will request the old access password, by default
all the monitors start from the factory with the number: 1 1 1 1
Next step, it will request us the new access password and its confirmation of this
one. The password could be selected for each user.
The menu that allow us to change the technical key is:
