Kroll UBK 1 Manual Download Page 15

15

Ausgabe 04/2012 Technische Änderungen vorbehalten / T

echnical data subject to change without notice 

Der Hersteller 

The manufacturer  / Le fabricant

Kroll GmbH

Pfarrgartenstraße 46, D-71737 Kirchberg

Tel. 07144/830-0

Dokumentationsbevollmächtigter 

Authorized person for documentation

Personne authorisée pour la 

documentation

Markus Preuss

erklärt hiermit, dass folgende Produkte / Herewith declares that the following products 

Explique par ce document que les produits suivants

Produktbezeichnung 

Description / Désignation du produit

Kompressor / Compressor / Compresseur

Typenbezeichnung  / Type / Type

UBK1, UBK2

allen einschlägigen Bestimmungen der 

folgenden Richtlinien entspricht 

correspond to all relevant regulations of 

the following guidelines

Correspondent à tous les spécifications 

des directives suivantes

2006/42/EG 

Maschinen  

Machines / Machines

2006/95/EG     

Elektrische Betriebsmittel zur  Verwendung 

innerhalb bestimmter Spannungsgrenzen

Electrical devices for use within   

certain voltage limits

 

Matériel électrique pour utilisation  

dans certaines limites de voltage

   

 

2004/108/EG

Elektromagnetische Verträglichkeit 

Electromagnetic compatibility  

Compatibilité électromagnetique  

Folgende harmonisierte Normen wurden 

angewandt 

The following harmonized norms have 

been applied

Les normes harmonisées suivantes ont 

été appliquées

DIN  EN  1012-1,  DIN  EN  1012-2                                                                                                                    

DIN EN ISO 12100-2, DIN EN 60204-1, 

DIN EN61000-6-2, 

DIN EN 61000-6-4, DIN 60034-1

Kirchberg, 04.08.2011
Alfred Schmid

Geschäftsführer / Director / Directeur

 

Konformitätserklärung /  

EC -Conformity / Déclaration de conformeté CE

Summary of Contents for UBK 1





















Reviews: