21
Technische Änderungen vorbehalten
GB
Malfunction Possible Cause Remedy
Burner ignites to late
a) Cartridge heater and temperatur-
sensor in burner tank in-
crusted or defective
a) Clean cartridge heater and
tempérture sensor in burner tank
or replace
No oil supply to the burner
tank
a) Feeding pump dirty
b) Strainer of the floating suction
device is clogged
c) Motor capacitor defect
d) Motor defect
a) Clean feeding pump strainer
b) Clean strainer
c) Replace motor capacitor
d) Replace moto
r
Nozzle clogged or carbonized
a) Flame ring falsely set
b) Too much or too less compressed air
c) To little ventilation in the heating
room
Each readjustement of oil quantity, primary or secondary air requires an exhaust measuring and adjustement to opti-
mum values - see at “regulations”
.
pyrométrique
a) Correct measuring of the flame ring
b) Correct gauge pressure
c) Make ventilation openings big
enough
Summary of Contents for KG/UB100
