5
OPERATION
48
OPTISYS TUR 1060
www.krohne.com
01/2019 - 4007152501 - MA OPTISYS TUR 1060 R01 en
This menu provides the instrument with a unique ID up to 4 digits. This ID can be used when
logged data is downloaded. This enables the data to be associated with a particular instrument
or location.
5.9.14 Logging Interval
This menu determines how often readings are logged. The setting is in minutes. This can be set
from 1 minute to 60 minutes.
Changing a setting and switching to the next item
•
Use the buttons
and
to change the setting.
•
Accept your selection by pressing
.
i
The device switches to the next item of the menu.
5.9.15 Download logged file
This menu is used to download CSV files to a flash drive. The selections are: No download (NO),
Calibration file only (CAL), All Files (ALL) or individual month (Jan, Feb
…
). Once the data stick is
inserted in the USB slot on the right side of the instrument push the button
^
. If no data stick is
inserted you will get an Error (Err). The upper display will flash while the download is taking
place and show "dOnE" when complete.
Changing a setting and switching to the next item
•
Use the buttons
and
to change the setting.
•
Accept your selection by pressing
.
i
The device switches to the next item of the menu.
5.9.16 Date and time
The MTOL+ has a displayed date (month / day / year) and time (hour / minute / Daylight Savings)
that must be set upon initial installation/setup. The next five menus are used for this setup.
AUTO
CAL
CONFIG
