3
INSTALLATION
14
OPTISYS TUR 1060
www.krohne.com
01/2019 - 4007152501 - MA OPTISYS TUR 1060 R01 en
3.1 General notes on installation
3.2 Storage and transport
•
Store and transport the device in a dry, dust-free environment.
•
Store and transport the device in an environment with a temperature between -20...+60
°
C /
-4...+176
°
F.
•
The original packing is designed to protect the equipment. It has to be used if the device is
transported or sent back to the manufacturer.
3.3 Requirements of the device
The device was designed to require very low input pressure. Though the device offers a wide
pressure range, as it has an integrated pressure regulator:
•
Input pressure range: 0.01...7 bar / 14.5...101.5 psi (built in regulator set at 1 bar / 15 psi)
•
Maximum allowable flow rate of the cuvette: 0.1...1,5 l/min / 0.026...0.4 gal/min
•
Maximum fluid temperature: +50
°
C / +122
°
F
INFORMATION!
Inspect the packaging carefully for damages or signs of rough handling. Report damage to the
carrier and to the local office of the manufacturer.
INFORMATION!
Do a check of the packing list to make sure that you have all the elements given in the order.
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.
INFORMATION!
The device must not be heated by radiated heat (e.g. exposure to the sun) to a electronics
housing surface temperature above the maximum permissible ambient temperature. If it is
necessary to prevent damage from heat sources, a heat protection (e.g. sun shade) has to be
installed.
