KROHNE OPTISWIRL 4200 Handbook Download Page 9

Page: 9 / 124

SAFETY INSTRUCTIONS

OPTISWIRL 4200

www.krohne.com

02/2022 - 4003930810 - MA OPTISWIRL4200 R10 en

1.3 Conformity

The manufacturer certifies successful testing of the product by applying the conformity mark on

the device.

This device fulfils the statutory requirements of the relevant directives.

For full information of the directives and standards and the approved certifications, please refer

to the declaration of conformity which can be downloaded from the manufacturer’s website.

DANGER!

For devices used in hazardous areas, additional safety notes apply; please refer to the Ex

documentation.

CAUTION!

For devices used in SIL applications, additional safety notes apply.

For detailed information refer to the "Safety Manual".

Summary of Contents for OPTISWIRL 4200





























































































































Search results

Summary of Contents for OPTISWIRL 4200

Reviews:

Related manuals for OPTISWIRL 4200

Brands by name

Popular brands

KROHNE OPTISWIRL 4200, Handbook

Search results

Summary of Contents for OPTISWIRL 4200

Reviews:

Related manuals for OPTISWIRL 4200

Brands by name

Popular brands