4.1
The manufacturer supplies the lights
protected by appropiate packaging to
ensure that during transport or storage
they do not suffer damage that would
prevent their correct installation and/or
operation.
4.2
The user, on receiving the lights, should
check the following points:
- Condition of the external packaging. If it
shows signs of significant deterioration,
the delivery service should be formally
notified.
- Also, check the state of the contents.
If any damage is apparent that may
prevent correct functioning, the supplier
should be formally notified within 8 days
of reception.
4.3
The storage conditions shall be such as
to guarantee the correct state of
conservation of the lights.
It is especially important to avoid
extremely damp environments or other
environments that may cause abrupt
changes in temperature (condensation).
5.1. SITING.
KRIPSOL ultrathin underwater lights
offer various installation possibilities:
Model PEH100.C
, suitable for
retrofitting to existing concrete swimming
pools. Mount directly onto the wall
using screws and wall plugs, with an
external cable (see fig. 1A, page 23).
Model PEH101.C
, suitable for new
concrete swimming pools or for retrofitting
to existing concrete swimming pools.
Mounted on the wall using a bushing
and 2” snap-on connector included in
the unit (see fig. 1B, page 23).
Model PEP100.C
, suitable for
prefabricated polyester swimming
pools. To be fixed by means of screws,
it includes gaskets and frame, (see fig.
1C, page 24).
Model PEP101.C
, suitable for
prefabricated polyester swimming
pools. Screw fitting using special parts
included with the underwater light, (see
fig. 1D, page 24).
Model PEL100.C
, suitable for
prefabricated polyester swimming
pools. To be fixed by means of screws,
it includes gaskets and special fixing
part 2”, (see fig. 1E, page 24).
4. PACKAGING, TRANSPORT
AND STORAGE
9
CAUTION
CAUTION
CAUTION
5. INSTALLATION AND ASSEMBLY
CAUTION