120
S T R E E T W O R K S O u t d o o r L i g h t i n g S o l u t i o n s
C o o p e r L i g h t i n g
R O A D W AY
NOTE: 1 150W units are for S55 lamp. 2 Refer to technical section for lamp/ballast/voltage compatibility. 3 Other distributions & cutoffs available. Consult your Streetworks Representative. 4 MOV option is not available for any
system requiring a three position terminal block (Example—240V with PCR wired 120V). In order for MOV option to function center terminal of three position terminal block must be connected to “Earth” ground.
H O U S I N G
Die-cast aluminum housing with
stainless steel bail latch. Standard
grey polyester powder coat finish.
Other finish colors available.
Consult your Streetworks
Representative. Optional NEMA
twistlock photocontrol receptacle
also available.
S O C K E T
Adjustable mogul-base porcelain
socket.
D O O R
Die-cast aluminum door frame with
integral hinges for hands free
installation, relamping and
maintenance. ANSI wattage/source
label.
L E N S
Removable borosilicate glass
refractor for use with High Pressure
Sodium, Metal Halide and Mercury
lamp sources.
R E F L E C T O R
The optical system is a
hydroformed anodized aluminum
reflector with a Dacron polyester
filter.
B A L L A S T A S S E M B LY
Hard mounted ballast with
encapsulated starter for protection
from environmental abuse.
Standard two position tunnel type
compression terminal block.
Optional swing-down ballast bridge
also available (Not available for 3G
applications).
M O U N T I N G
Two-bolt/one bracket slipfitter with
cast-in pipe stop and leveling steps.
Fixed-in-place birdguard seals
around 1 1/4" or 2" mounting arms.
(Birdguard not needed for 2" arm.)
R O A D W AY L U M I N A I R E
OVD
DEEP PRISMATIC GLASS
150-400W
MH/HPS/MERCURY
E P A :
Effective Projective Area:
.64
S H I P P I N G D A T A
Approximate Net Weight:
35 lbs. (16 kgs.)
O R D E R I N G I N F O R M AT I O N
S A M P L E N U M B E R
: O V D 1 5 S W W 2 F 4
OPTIONS (add as suffix)
1=Single Fuse, Internally Mounted (120 or 277V)
2=Double Fuse, Internally Mounted (208, 240, or 480V)
4=Photocontrol Receptacle
WH=White
BK=Black
BZ=Bronze
E=150W/100V/HPS Ballast
H=Plug-in Starter Receptacle
K=Level Indicator
L=Lamp
M=MOV Lightning Surge Protector
4
P=Polycarbonate Refractor (250W Max.)
T=Swing-down Ballast Bridge
U=UL/CSA Listed
ACCESSORIES (order separately)
RA1003=Cutoff Visor
OA/RA1013=Photocontrol Shorting Cap
OA/RA1014=120V Photocontrol
OA/RA1016=105V-285V Photocontrol
OA/RA1027=480V Photocontrol
OA1028=Field Installed PCR Kit
OA1218=TufGuard Vandal Shield
O P T I O N S + A C C E S S O R I E S
[ M u s t b e l i s t e d i n t h e o r d e r s h o w n a n d s e p a r a t e d b y a d a s h ]
STREETWORKS
™
O
ACCESSORIES
(See Below)
PRODUCT
FAMILY
OVD
LAMP WATTAGE
15=150W
1
20=200W
25=250W
31=310W
40=400W
24=250/400W wired 250W
42=400/250W wired 400W
LAMP TYPE
2
S=High Pressure
Sodium
V=Mercury
M=Metal Halide
BALLAST TYPE
2
C=CWI
M=Mag. Reg.
W=CWA
R=Reac./NPF
P=Hi. Reac./HPF
H=Reac./HPF
N=Hi. Reac./NPF
K=10KV CWA
VOLTAGE
2
2=120V
0=208V
4=240V
7=277V
8=480V
9=347V
F=120/240 wired 120V
P=240 w/PCR wired 120V
W=Multi-Tap wired 120V
N=Multi-Tap wired 277V
V=Multi-Tap wired 240V
DISTRIBUTION
3
2=Type II
3=Type III
CUTOFF
C=SNCO
F=MNCO
30" [762mm]
12 3/4"
[324mm]
16 15/16" [430mm]
O P T I O N A L C O L O R S
[ S t a n d a r d c o l o r i s g r e y, o t h e r f i n i s h c o l o r s a v a i l a b l e . C o n s u l t y o u r C o o p e r L i g h t i n g r e p r e s e n t a t i v e ]
WH
White
BK
Black
BZ
Bronze
