1.
To reduce the risk of electric shock, this lamp has a
polarized plug (one blade is wider than the other ).
The plug will fit in a polarized outlet only one way. If the
plug does not fit fully into the outlet, reverse the plug.
If plug still does not fit, contact a qualified electrician.
Never use an extension cord unless the plug can be
fully inserted. Do not alter the plug.
2
. Do not install non-factory wiring or any other electrical
components. Altering or modifying the lamp in any way
will
render the product unsafe.
3.
Avoid laying objects directly over the power supply cord
to avoid cutting or damaging the wire.
4
. Keep curtains, shades, wall hangings and all otherfabrics
and objects away from the lamp shade, light switchand
the light bulb. Lamps are not designed to support
additional weight. Do not hang any objects from the
lamp or any lamp part.
5.
Place the lamp on a stable, level surface in an area
where the lamp will not be tipped over or bumped.
BULB REPLACEMENT
1.
Turn off and unplug the lamp and allow bulb to cool
before replacing bulb.
2.
Light bulb should never touch the lamp shade.
CLEANING AND MAINTENANCE
1.
To clean: use a soft, dry cloth only.
2.
Do not use chemical or abrasive cleaning solutions.
Use one 150 Watt, Type A, 3-Way bulb or CFL equivalent
bulb.
This lamp is approved for indoor use only.
DO NOT EXCEED RECOMMENDED BULB WATTAGE.
Made in China
For Customer Assistance:
www.jalexanderhome.com
Read and Save:
6.
1.
Place
the lamp base (A) on a flat surface.
2.
Install Light Bulb into socket assembly (B).
3.
Pinch and insert harp (C) into the harp fittings on
socket assembly (B). Slide the caps on harp (C) over
the fittings on socket assembly (B) to secure.
4
. Remove the finial (E) from the harp (C).
5.
Place the shade (D) on harp (C) and secure with
finial (E).
6.
Insert plug into an electrical outlet.
7. Use switch on socket assembly (B) to turn lamp
on and off.
ASSEMBLY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
MODEL #: JAE018
JAE018-T20 (CFL bulb included)
TABLE LAMP
A
B
C
D
E
