background image

SLR-181113       CERAMIC BASE LAMP

ADDITIONAL SAFETY PRECAUTIONS FOR LIGHTING:

1. Carefully read all instructions for the assembly and use of this before connection to electricity supply.

2. Use only the recommended bulb rating, as detailed on the lamp holder and /or label.

3. Never use a bulb that is rated more than the recommended capacity.

4. Light bulbs become very hot in seconds. Do not attempt to touch the bulb while the lamp is lit and supervise others accordingly.

5. Before cleaning or replacing a defective bulb, switch off the lamp and unplug from the mains socket. Allow the bulb to cool for at

    least 10minutes, before touching it and making the change.

6. Ensure the new bulb is secure in the holder before reconnecting to the power supply.

7. If in doubt, consult a qualified electrician.

Rated voltage: 220-240V ~ 50Hz

This lamp requires: 1xMax 40W E14 Small Edison screw (Not included)

INSTRUCTIONS FOR INSTALLATION:

1. Caution:Assemble the lamp completely before connecting to the electricity supply.

3. Install the bulb – Max 40W E14 (not included) into the lamp holder.

4. Check to ensure that all the components have been assembled correctly.

5. Connect to the mains supply.

 

IMPORTANT SAFETY INSTRUCTIONS:

The following safety precautions should always be followed, to reduce the risk of electric shock, personal injury or fire. It is

important to read all of these instructions carefully before using the product, and to save them for future reference or new

users.

1. This product must only be used as intended in accordance with the enclosed operating instructions.

2. Do not carry the appliance by the mains cable or pull the cable to remove the plug from the socket.

3. CAUTION: Electric shock hazard. The external flexible cable, plug or the switch of this lamp can not be replaced. If any of

these parts are damaged, disconnect from mains power.The lamp should be destroyed!

4. If the appliance stops unexpectedly or appears to malfunction, switch off the power supply, unplug from the mains and stop using

immediately.Seek professional advice to rectify the fault or make repairs.

5. Switch off the power supply or unplug from the mains socket when not in use, before cleaning or changing accessories.

6. Avoid positioning the appliance where the power cable might be accidentally trapped or damaged.

7. Keep the appliance and cable away from sources of heat, sharp objects or anything that may cause damage.

8. Ensure the appliance is switched OFF before connecting the mains power supply.

9. Be aware that some surfaces may become hot. Do not touch hot surfaces and supervise others accordingly.

10. This product has not been designed for use by children.

11. Children should be closely supervised at all times when they are near any electrical appliance.

12. To protect against electric shock, never allow the appliance, the mains cable or plug to come into contact with water or any other

liquid.

13. Never reach for any appliance that has fallen into water. Switch off the power supply at the mains immediately and unplug. Do

not re-use until the product has been inspected and approved by a qualified electrician.

14. Always ensure that hands are dry before operating or adjusting any switch on the product or touching the plug and mains supply

connections.

15. To disconnect, first ensure that all controls are in the OFF position, then remove the plug from the electricity supply.

16. Where relevant keep all ventilation slots, filters, etc. uncovered and clear of debris. Never drop or insert objects into the openings.

17. Do not use outdoors. This appliance has been designed for domestic indoors use only.

18. Replace any cracked protective shield.

Product specification

2. Install the lamp shade to the base.

Reviews: