Main Menu, Navigation and Setup
17
S-1200/ 1200U
CONFIGURE VIDEO OUTPUT (S-1200U only)
1. Overview
Configure video output sets the analog video scaler to an appropriate video output resolution.
Analog video can be up-scaled up to 1080P 60Hz allowing video parity for all video sources
(S-1200U only) Once this has been set all analog video sources will be up-scaled and output to this
resolution. HDMI inputs are NOT affected by this setting.
NOTE:
Make sure your video display is capable of displaying the output resolution selected, a series
of error messages requiring user response will appear if the output resolution is set incorrectly.
The S-1200 is able to transcode incoming video signals. Video input from composite, S-video or
Component sources can be output over the HDMI output.
NOTE: The video output will be determined by the source.
2. OSD Default Output
Sets the output format for the On Screen Display. The OSD options are listed in the chart below.
3. Output Format
(S-1200 only)
Sets the video frequency for the video output of the transcoder. For example If the output is set to
50Hz then any video frequency from the incoming source will be converted to 50Hz.
The Options are:
Follow Source (Uses the same frequency as the source component), 50Hz and 60Hz
4. Analog Video Scaler (S-1200U only)
A.
Setting maximum Video output resolution
These are the available analog scaler output formats for the S-1200u
480i - 720 x 480 60Hz
720p- 1280 x 720 60Hz
1080p - 1920 x 1080 30Hz
480p- 720 x 480 60Hz
1080i - 1920 x 1080 50Hz
(Outside the USA)
1080p - 1920 x 1080 50Hz
(Outside the USA)
576i- 720 x 576 50Hz
(Outside the USA)
1080i - 1920 x 1080 60Hz
1080p - 1920 x 1080 60Hz
576p- 720 x 576 50Hz
(Outside the USA)
1080p - 1920 x 1080
24Hz
720p- 1280 x 720 50Hz
(Outside the USA)
1080p- 1920 x 1080 25Hz
(Outside the USA)
