Assemble the Large Boxes
Now you can assemble the large boxes using 1 1/4" coarse-thread Kreg Pocket-Hole Screws, as shown. Make sure that you
have both Large Box Sides oriented correctly, and that you position the Rail at the top end.
Make the Small Box Parts
Cut the parts for a pair of small boxes—four Small Box Sides, two Small Box Tops, two Small Box Bottoms, and two Small Box
Rails from 3/4" plywood, as shown in the cutting diagram. Drill pocket holes in the Tops, Bottoms, and Rails, as shown.
4
5
Page 8 of 13
Summary of Contents for Garage Storage and Work Center
Page 4: ...Page 4 of 13...
Page 5: ...Page 5 of 13...