If necessary, install the fluid needle (
Chapter 8.5 ‘Changing the fluid needle’
4.
Tighten head section ( Fig. 16/4) with fastening screws ( Fig. 16/5).
5.
Screw on the cap nut (
Chapter 8.4 ‘Changing the fluid nozzle and the air nozzle’
NOTICE!
Lightly grease springs, threads and seals with the "Krautzberger special grease" during instal-
lation.
"Krautzberger special grease" can be purchased from Krautzberger GmbH. See the last page
for contact data.
Operating instructions
T-Dok-214-GB-Rev.2
[email protected], www.krautzberger.com
GB–36
Summary of Contents for 200-0153
Page 48: ......
