Krautzberger 200-0153, Operating Instructions Manual

Page: 27 / 49

8.2 Maintenance schedule
The following sections describe the maintenance work that is required for optimal and fault-free
operation of the automatic spray gun. Check wearing parts such as seals, nozzles and needles at
regular intervals. The level of wear depends on the abrasiveness of the spray fluid used. Escaping
air and spray fluid as well as the deterioration of the spray pattern are signs that parts are worn.
Contact Krautzberger Customer Care with any questions on maintenance work and maintenance
intervals.
Interval Maintenance work Personnel
before performing any
maintenance work Clean automatic spray gun (
Ä
Chapter 8.3
‘Cleaning the automatic spray gun’ on page 27 ).
Specialised personnel
if needed Change material nozzle and air nozzle (
Ä
Chapter 8.4 ‘Changing the fluid nozzle and
the air nozzle’ on page 29 ).
Specialised personnel
Change fluid needle (
Ä
Chapter 8.5 ‘Changing
the fluid needle’ on page 30 ).
Specialised personnel
Change needle seals ( Ä Chapter 8.6
‘Changing the needle seals’ on page 34 ).
Specialised personnel
8.3 Cleaning the automatic spray gun
WARNING!
Risk of injury due to improper cleaning!
– Adhere to the safety data sheets of the cleaning product manufacturer.
– Do not fully immerse the automatic spray gun in a cleaning product.
Automatic spray gun M14
ENGLISH
■ 200-0153 GB–27