Kraun KW.03 User Manual Download Page 37

Page: 37 / 37

Manual

www.kraun.com

9. does the IP Cam provide the recording function?

You can do the recording of the video/audio of the IP Cam from the KraunView software with the

KraunView software. You can also do the video/audio recording to the standard NAS storage device.

Another software CamPlay is needed to playback the recorded vide/audio files.

10. Can I connect the IP camera directly to my PC/notebook with an ethernet cable?

If the IP camera is directly connected to your PC/notebook computer using an Ethernet cable, the IP

camera will automatically use an IP address called “auto IP” with IP address 169.254.xxx.xxx. If your

PC/notebook computer is configured to DHCP, it will also use an “auto IP” address. But this will take

about one minute after the IP camera is connected to the computer and you need to make sure that

the WiFi interface on your PC/notebook computer is disabled. After about one minute, you can run

the KraunView software to access the IP camera, the CAM ID should be displayed on the “auto-search”

list. You can then see the video by double clicking the CAM ID icon. But you need to know that in this

situation, other local or remote computer can not see the video.

Summary of Contents for KW.03






































Search results

Summary of Contents for KW.03

Reviews:

Related manuals for KW.03

Brands by name

Popular brands

Kraun KW.03, User Manual

Search results

Summary of Contents for KW.03

Reviews:

Related manuals for KW.03

Brands by name

Popular brands