26
Manual
www.kraun.com
3.12. led display Control
The IP CAM provides the Led Display Control function, you can enable or disable the led display/indication
on the front panel of the IP cam device. The related settings are explained below:
1. Normal led display – select this to enable the status led and ethernet led display.
2. Turn off led display always – select this to disable the status led and ethernet led display.
3. Turn off led display after network connected – select this then the led will display when the Internet
connection has some problem, the led display will be off when the Internet connection is successful.
Figure 3-17: Led Control settings page
