ADSL2/2+ Modem Router
www.kraun.it
21
4. Click “WAN” in left menu to display the window shown below. The
table will show the general information of WAN connection.
5. Click “Route” to display
the window shown in the
right figure, displaying the
default information.
5.2. Advanced Settings
5.2.1. WAN
Click “Advanced Settings” ->
“WAN”. Edit WAN information in
this window.
Note: After modifying/adding new
information, you need to reboot
the device to activate the settings.
1) VPI (Virtual Path Identifier):
Virtual Path between two
points in the ATM network (0
~ 255).
2) VCI (Virtual Channel
Identifier): Virtual channel
between two points in the
ATM network. Its value ranges
(32 ~ 65535, 1 ~ 31 are
reserved).
3) Service category: Select one from five available service categories.
4) Enable Quality of Service (QoS): Check to enable it.