Kränzle Ventos 14, Use And Maintenance, Page: 10 / 21

IT EN
EN - 4
TECHNICAL
CHARACTERISTICS
Voltage ........................................ 220-240 V
Motor power ........................... 1000 W (909)
900 W (815)
Sound level .......................... 62 dB(A) (909)
65dB(A) (815)
Negative pressure .........................210 mbar
Paper bag capacity ................................ 12 l
Dimensions ..... 320 x 320 x 520H mm (909)
340 x 340 x 570H mm (815)
Weight 6 kg (909)
8 kg (815 Plastic)
9 kg (815 Stainless steel)
Accessories ..........................Ø 32 mm (909)
Ø 36 mm (815)
TYPE OF USE
Use this appliance only as a dry vacuum
cleaner to suck up dust, crumbs etc.
It has only been designed for this use.
DANGER:
The manufacturer can not be held re-
sponsible for any damage due to improp-
er or incorrect use.
Any other use releases the manufacturer
from liability for harm to persons and/
or property and invalidates any warranty
condition.
IMPROPER USE
Do not use the appliance to:
- Suck up liquids of any kind;
- Suck up flammable, explosive, corrosive
and/or toxic substances.
- Suck up hot substances.
Do not use the appliance in areas at risk of
explosion.
PREPARING
THE APPLIANCE
Checking the filter systems
- Release the levers (1 Fig. 1) and remove
the cover (2 Fig. 2) complete with the mo-
tor unit.
- Remove the polyester filter (3 Fig. 3).
- Check that the paper bag (4 Fig. 3) is as-
sembled inside the appliance.
- If the paper bag (4 Fig.3) is not present,
mount it as follows:
VENTOS 14
Insert the square cardboard rigid part into
the slot on the drum.
815
Fit the paper bag (4 Fig.4) into the noz-
zle (4a Fig. 4) until passing the collar (4b
Fig.4).
- Replace the polyester filter (3 Fig. 3).
- Replace the cover and lock it using the
levers (1 Fig. 1).
Assembling the piping
- VENTOS 14
Insert the sleeve with bayonet coupling (5
Fig. 5) into the hole (6 Fig. 5), moving the
arrow on the sleeve (5 Fig. 5) to position
“ A ”, then turn the sleeve clockwise until it
locks (arrow in position “ B ”).
- 815
Lift the knob (5a Fig. 5) and insert the
sleeve (5b Fig. 5) in the hole (6 Fig. 5)
until it can’t go any further and then re-
lease the knob.
- Attach the extension (7 Fig.6) to the ergo-
nomic handle (8 Fig.6).
- Attach the required accessory (suction
tool, dusting brush, crevice tool, mul-
ti-purpose brush etc.) to the rigid exten-
sions (9 Fig.7).