WP-871xr
Quick Start
P/N: 2 9 0 0 - 3 0 1 0 6 1 QS
Rev: 2
Scan for full manual
WP-871xr Quick Start Guide
This guide helps you install and use your
WP-871xr
for the first time.
www.kramerav.com/downloads/WP-871xr
to download the latest user manual and check if firmware
upgrades are available.
Step 1:
Check what’s in the box
WP-871xr
HDMI 4K Line Transmitter
1 Quick start guide
1 Power adapter (with open DC head) and cord
Frame (or frame set) and faceplate
Step 2: Get to know your WP-871xr
#
Feature
Function
1
HDMI
TM
IN Connector
Connects to an HDMI source.
2
STATUS LED
Lights green when power is connected to the device.
Lights blue when powered and both active source and acceptor are detected.
3
Ring Tongue Terminal Grounding
Screw
Connect to grounding wire (optional).
4
Power Supply 2-pin Terminal Block
Connector
To Connect to a power supply (if required). Connect GND to GND, +12V to +12V.
5
DGKat-2.0 OUT RJ-45 Connector
Connect to the DGKat-2.0 IN connector on the using CAT 6A cable.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
