![background image](http://html1.mh-extra.com/html/kramer/wp-871xr/wp-871xr_quick-start-manual_2001008002.webp)
Front Panel
– Before assembly
#
Feature
Function
SETUP DIP-switches
Do not change the default DIP-switch settings (located on the front panel)
6
DIP-switch 1
Compression
ON (right)
– High compression level for additional range extension
(default).
7
DIP-switch 2
Compression Setup
OFF (left)
– Enable compression (default).
ON (right)
– For future use.
Step 3: Install the WP-871xr
Insert the device into the in-wall box (note that first you need to connect the DGKAT 2.0 cable and power) and connect
the parts as shown in the illustrations below:
European Version
US Version
We recommend that you use any of the following standard 1 Gang in-wall junction boxes (or their equivalent):
US
: 1 Gang US electrical junction boxes.
EU
: 1 Gang in-wall junction box, with a cut-hole diameter of 68mm and depth that can fit in both the device and the
connected cables (DIN 49073).
UK
: 1 Gang in-wall junction box, 75x75mm (W, H) and depth that can fit in both the device and the connected cables
(BS 4662).