Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your
WP-871xr
. For best results, we recommend that
you always use Kramer high-performance cables to connect AV equipment to the
WP-871xr
.
We highly recommend using only Kramer UNIKAT cables with these products. If using 3
rd
party shielded CAT 6A
cables, both ends of the shield must be soldered to the connectors for the products to function properly. Do not use
any jumpers, unshielded wall plates or mid-span cable connections. These extenders are not compatible with
HDBaseT technologies. Prior to signal extension, ensure that the extension line cable is lying straight and not coiled.
Step 5: Connect the power
Connect the 12V power adapter to the remote device (for example,
PT-872xr
) or to
WP-871xr
if needed, and plug the power
supply into the mains electricity. This device provides power to its counterpart via DGKat 2.0. Each device can provide or
accept power over cable (PoC) via DGKat 2.0.
Safety
Instructions
Caution:
There are no operator serviceable parts inside the unit.
Warning:
Use only the Kramer Electronics power supply that is provided with the unit.
Warning:
Disconnect the power and unplug the unit from the wall before installing.
See
for updated safety information.
