![background image](http://html1.mh-extra.com/html/kramer/wp-110xl/wp-110xl_user-manual_2002432009.webp)
6
WP-110xl - Connecting and Installing the WP-110xl
4
Connecting and Installing the WP-110xl
Always switch off the power to each device before connecting it to your
WP-110xl
. After connecting your
WP-110xl
, connect its power and
then switch on the power to each device.
To connect the
WP-110xl
as illustrated in the example in
Figure 2
:
1. Connect the LINE OUTPUT RJ-45 connector on the rear panel of the
WP-
110xl
to the TP receiver, (for example, the
PT-120
or the
TP-126xl
).
2. Ground the wall plate, (see
Section
4.1
).
3. Connect the 12V DC power supply to the 12V and GND terminals taking
care to observe the correct polarity.
4. Install the
WP-110xl
into a suitable wall box or rack mount.
5. Connect a computer graphics source (for example, a PC) to the PC IN
15-pin HD connector.
Figure 2: Connecting the WP-110xl
UXGA/Data Line Transmitter
i
Summary of Contents for WP-110xl
Page 2: ......
Page 14: ...WP 110xl Capturing the EDID 11 Figure 6 WP 110xl EU Wall Plate...
Page 16: ......