Kramer VS-88DT, User Manual, Page: 8 / 62

Kramer Electronics Ltd.
VS-88DT
– Defining the VS-88DT HDMI/HDBT Matrix Switcher
6
Defining the VS-88DT HDMI/HDBT
Matrix Switcher
Figure 1 defines the front panel of the VS-88DT .
Figure 1: VS-88DT HDMI/HDBT Matrix Switcher Front Panel
# Feature Function
1 IR LED Lights yellow when receiving an IR signal
2 IR Sensor IR receiver for remote control
3 POWER LED Lights green when the device is powered on
4 IN 1~8 Press to select an input after selecting an output (see Switching Inputs to
Outputs on page 13 )
5 OUT 1~8 Press to switch, followed by an input or OFF
6 ALL Button Press, followed by an Input to switch the Input to all outputs or press followed by the
Off button to disconnect all switches, (see
Cancelling One or All Outputs on page 14 )
7 STO Button Press to store a preset configuration followed by the preset number in which to save it
(see
Section Storing and Recalling Preset Configurations on page 14 )
8 EDID Button Press to copy the EDID from an Output to an Input (see Acquiring an
EDID on page 14 )
9 LOCK Button Press and hold to lock the front panel buttons, (see Locking and Unlocking the Front
Panel on page 15 ). Press and hold again to unlock
10 Menu
Navigation
Pad
Use the Enter, up (▲), down (▼), left (◄) and right (►) buttons to navigate the menu,
and modify parameters or values (see
Section Using the Menu on page 17 )
11 LCD Readout
(20 char x 2
lines)
Displays either the input/output resolution currently selected or the menu during
configuration
12 OFF Button Press after an output button to cancel the currently selected outputs. Press after the
All button to cancel all currently switched outputs (see
Cancelling One or All
Outputs on page 14 )
13 RCL Button Press, followed by a preset number to recall the preset configuration (see Section
Storing and Recalling Preset Configurations on page 14 )
14 MENU Button Press to enter the Menu and move one level back when the menu is displayed (see
Section Using the Menu on page 17 )