KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VS-808DS 8x8 Video Audio Matrix Switcher / Scaler
6
Table 2: VS-808DS 8x8 Video Audio Matrix Switcher / Scaler Rear Panel Features
#
Feature
Function
16
AUDIO INPUT L
RCA
Connectors
Connect to the LEFT audio sources (from 1 to 8)
17
AUDIO INPUT R
RCA
Connectors
Connect to the RIGHT audio sources (from 1 to 8)
18
EXT. SYNC
BNC Connector
Connect to an external SYNC
19
SYNC SELECT EXT. / IN 1
Pushbutton
Press to select the external SYNC, release to select the SYNC
from input 1
20
VIDEO INPUT
BNC
Connectors
Connect to the composite video sources (from 1 to 8)
21
AUDIO OUTPUT L
RCA
Connectors
Connect to the LEFT audio acceptors (from 1 to 8)
22
AUDIO OUTPUT R
RCA
Connectors
Connect to the RIGHT audio acceptors (from 1 to 8)
23
VIDEO OUTPUT
BNC
Connectors
Connect to the composite video acceptors (from 1 to 8)
24
RS-485
Terminal Block Port
Pin G is for Ground connection
1
; Pins B (-) and A (+) are for
RS-485
25
RS-232
DB 9F Port
Connects to the PC or the Remote Controller
26
SCALER OUTPUT
HD15
Connector
Connects to the video acceptor that displays the scaled output
2
27
Dipswitches
Dipswitches for setup of the unit (1, 2, and 3 are for setting the
Machine # (SELF ADDRESS), 4 is for RS-485 Termination, 5 is
for Reply, and 8 is for RS-232/RS-485 (see section 6.3)
28
Power Connector with Fuse
AC connector enabling power supply to the unit
29
REMOTE IR
3.5mm Mini Jack
Connect to an external IR receiver unit for controlling the machine via
an IR remote controller (instead of using the front panel IR receiver)
3
1 Usually not connected. If shielded twisted pair is used for RS-485, G may be connected to the shield
2 The signal that is converted via the scaled output is the input signal that is routed to output 8
3 Optional. Can be used instead of the front panel (built-in) IR receiver to remotely control the VS-808DS (only if the internal
IR connection cable has been installed)