KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VS-808DS
8
6 Connecting the VS-808DS
To connect
1
the
VS-808DS
, as the example in Figure 2 shows, do the following
2
:
1. Connect up to eight composite video sources (for example, input 1
connected to a camera, input 3 connected to video player and input 8
connected to a DVD player) to the VIDEO INPUT BNC connectors and
the AUDIO INPUT R and L RCA connectors.
2. Connect the eight VIDEO OUTPUT BNC connectors and the AUDIO
OUTPUT R and L RCA connectors to up to eight composite video
acceptors (for example, composite video recorders, TV and so on).
3. Connect a PC and/or controller to the RS-232 port (see section 6.1).
4. Connect
3
the SCALER OUT HD15 connector to a VGA acceptor (for
example, an LCD display).
5. Connect the power cord to the mains electricity (not illustrated in Figure 2).
1 You do not have to connect all the inputs or all the outputs
2 Switch OFF the power on each device before connecting it to your VS-808DS. After connecting your VS-808DS, switch on
its power and then switch on the power on each device
3 After connecting the power, if required, press the OUTPUT RES. button to set the scaled output resolution
