VS-48HDCPxl - Overview
5
You can control the
VS-48HDCPxl
using the front panel buttons or remotely via:
RS-232 serial commands transmitted by a touch screen system, PC or other
serial controller
The Kramer infrared remote control transmitter
An external remote IR receiver (optional), see
Section
3.3
The Ethernet port
3.1
About Fast Switching
Older display devices required a longer time between the loss of one digital signal
and the introduction of another, as well as a physical disconnection of the
interconnecting cable in order to be able to detect and adjust to the new video
attributes and parameters. Normal switching, therefore, introduced a 5V signal
disconnection along with a delay in switching. Many newer display devices,
however, are now capable of “on-the-fly” switching.
Depending on the display device in use, the
VS-48HDCPxl
allows for fast
switching (minor reset and the connection kept alive) and extra fast switching (no
reset and the connection kept alive). Using the fast and extra fast switching modes
allows for fraction-of-a-second switching times when using high performance
display devices or when using a scaler on the video output.
3.2
Defining the VS-48HDCPxl 4x8 DVI Matrix Switcher
This section defines the
VS-48HDCPxl
.
Summary of Contents for VS-48HDCPxI
Page 2: ......
Page 12: ...VS 48HDCPxl Installing in a Rack 9 4 Installing in a Rack ...
Page 28: ......