VS-48HDCPxl - Operating the VS-48HDCPxl 4x8 DVI Matrix Switcher
19
19
6.8
Resetting the Ethernet Configuration to Default Values
This procedure resets only the IP related parameters. All switching and
preset values remain unchanged.
To reset the IP parameters to their default values
(see
Section
8
):
Press and hold the ETH Reset button on the rear panel while powering up
the device
6.9
Controlling Configuration via the Ethernet Port
To control several units via Ethernet, connect the Master unit (Machine # 1)
Ethernet port on your PC. Use your PC to configure the initial settings (see
Section
5.1
).
6.10
Firmware Upgrade
Instructions for upgrading the firmware can be found in the
STC Firmware
Upgrade
document.
i
Summary of Contents for VS-48HDCPxI
Page 2: ......
Page 12: ...VS 48HDCPxl Installing in a Rack 9 4 Installing in a Rack ...
Page 28: ......