VS-48HDCPxl - Operating the VS-48HDCPxl 4x8 DVI Matrix Switcher
13
13
6
Operating the VS-48HDCPxl 4x8 DVI Matrix
Switcher
This section describes how to:
Route inputs to outputs (see
Section
6.1
)
Disconnect outputs (see
Section
6.2
)
Store and recall a setup (see
Section
6.3
)
Changing the port switching speed (see
Section
6.4
)
Set HDCP on or off (see
Section
6.5
)
Acquire the EDID (see
Section
6.6
)
Lock and unlock the front panel (see
Section
6.7
)
Reset the Ethernet configuration to default values (see
Section
6.8
)
Control the machine via the Ethernet port (see
Section
6.9
)
6.1
Routing Inputs to Outputs
To route an input to an output:
Press an OUT key, followed by an IN key to route this input to that output
To route one input to all outputs:
Press ALL followed by an IN button. The input is routed to all outputs
6.2
Disconnecting the Outputs
To disconnect one output:
Press the OUT button of the output to disconnect and press OFF
To disconnect all outputs at once:
Press the ALL button and then press OFF. This disconnects all the outputs
Summary of Contents for VS-48HDCPxI
Page 2: ......
Page 12: ...VS 48HDCPxl Installing in a Rack 9 4 Installing in a Rack ...
Page 28: ......