![background image](http://html.mh-extra.com/html/kramer/vs-44h2/vs-44h2_user-manual_2001354039.webp)
Kramer Electronics Ltd.
VS-44H2
– Using Embedded Webpages
37
3. Click
Ok
and add the password details.
Figure 39: Settings Page
– Security Activation Message
4. Click
Save
. The following message appears:
Figure 40: Settings Page
– Password Updated
5. Click
OK
.
Webpages are accessed using authentication.
Changing the Ethernet Settings
The Communication tab shows the device details, such as IP Address, Mask, MAC address
and so on, and enables changing them. You can perform the following actions:
•
Changing Ethernet Settings when DHCP is OFF
•
Changing Ethernet Settings when DHCP is ON
Changing Ethernet Settings when DHCP is OFF
By default, DHCP is set to OFF.
To define Ethernet parameters when DHCP is set to OFF:
1. In the Navigation pane, click
Settings
. The General tab in the Settings page appears