Kramer VS-44H2, User Manual

Page: 60 / 66

Kramer Electronics Ltd.
VS-44H2
– Protocol 3000
58
Function Description Syntax Parameters/Attributes Example
X-MTX-
SET-
INPUTS
Set auto switching input
signals group per
output.
The order of the
inputs in the list is fixing
implicitly the priority of
each input in case the
user choose later
“Priority” auto switching
strategy.
The highest priority is 1,
then 2 etc. in the
decreasing order.
X-MTX-SET-INPUTS
can be used to define
the Group list for
“Priority” auto-switching
strategy.
X-MTX-SET-INPUTS
override X-PRIORITY
configuration. Auto
switching group list is
common for all Auto
switching strategies
(last connected/
priority).
This syntax uses the
new convention of
using brackets to define
a list of fields “[ ]”.
This is an Extended
Protocol 3000
command.
COMMAND
#X-MTX-SET-INPUT

<direction_type1> . <port_type1> .
<port_index1> . <signal_type1> .
<index1> , [<direction_type2> . <port_type2> . <port_index2> .
<signal_type2> . <index2> ,.., ] <CR>
FEEDBACK
~nn@X-MTX-SET-INPUT

<direction_type1> . <port_type1> .
<port_index1> . <signal_type1> .
<index1> , [<direction_type2> . <port_type2> . <port_index2> .
<signal_type2> . <index2> ,.., ] <CR><LF>
The following attributes comprise
the signal ID:
▪
<direction_type>
–
Direction of the port:
o
IN
– Input
o
OUT
– Output
▪ <port_format> – Type of
signal on the port:
o
HDMI
▪
<port_index>
– The port
number as printed on the front
or rear panel
1
– Input 1
2
– Input 2
3
– Input 3
4
– Input 4
1
– Output 1
2
– Output 2
3
– Output 3
4
– Output 4
▪
<signal_type>
– Signal ID
attribute:
o
VIDEO
▪
<index>
– Indicates a specific
channel number when there
are multiple channels of the
same type
Set auto switching input
signals group for Output 1.
#X-MTX-SET-
INPUTS

out . hdmi . 1 . vid
eo . 1 , [in . hdmi . 1 . video
. 1 , in . hdmi . 2 . video . 1…
] <CR>
X-MTX-
SET-
INPUTS?
Get auto switching
input signals group per
output.
The order of the
inputs in the list is fixing
implicitly the priority of
each input in case the
user choose later
“Priority” auto switching
strategy.
The highest priority is 1,
then 2 etc. in the
decreasing order.
X-MTX-SET-INPUTS
can be used to define
the Group list for
“Priority” auto-switching
strategy.
X-MTX-SET-INPUTS
override X-PRIORITY
configuration. Auto
switching group list is
common for all Auto
switching strategies
(last connected/
priority).
This syntax uses the
new convention of
using brackets to define
a list of fields “[ ]”.
This is an Extended
Protocol 3000
command.
COMMAND
#X-MTX-SET-INPUT?

<direction_type1> . <port_type1> .
<port_index1> . <signal_type1> . <index1> <CR>
FEEDBACK
Get:
~nn@X-MTX-SET-INPUT

<direction_type1> . <port_type1> .
<port_index1> . <signal_type1> .
<index1> , [<direction_type2> . <port_type2> . <port_index2> .
<signal_type2> . <index2> ,.., ] <CR><LF>
The following attributes comprise
the signal ID:
▪ <direction_type>
–
Direction of the port:
o
IN
– Input
o
OUT
– Output
▪
<port_format>
– Type of
signal on the port:
o
HDMI
▪
<port_index>
– The port
number as printed on the front
or rear panel
1
– Input 1
2
– Input 2
3
– Input 3
4
– Input 4
1
– Output 1
2
– Output 2
3
– Output 3
4
– Output 4
▪
<signal_type>
– Signal ID
attribute:
o
VIDEO
▪
<index>
– Indicates a specific
channel number when there
are multiple channels of the
same type
Get auto switching input
signals group for Output 3.
#X-MTX-SET-
INPUTS?

out . hdmi . 3 . vi
deo . 1 <CR>