![background image](http://html.mh-extra.com/html/kramer/vs-42hn/vs-42hn_user-manual_2001341042.webp)
VS-42HN - Protocol 3000
39
Command -
SIGNAL
Command Type - System
Command Name
Permission
Transparency
Set:
-
-
-
Get
SIGNAL?
End User
Public
Description
Syntax
Set:
-
-
Get:
Get input signal lock status
#
SIGNAL?
␠
inp_id
␍
Response
~ nn@
SIGNAL
␠
inp_id,status
␍␊
Parameters
inp_id -
input number
status
- lock status according to signal validation
– 0: Signal or sink is not valid, 1: Signal or sink is valid
Response Triggers
After execution, a response is sent to the com port from which the Get was received
Response is sent after every change in input signal status ON to OFF, or OFF to ON
Command -
SN?
Command Type - System-mandatory
Command Name
Permission
Transparency
Set:
-
-
-
Get:
SN?
End User
Public
Description
Syntax
Set:
-
-
Get:
Get device serial number
#
SN?
␍
Response
~nn@
SN
␠
serial_number
␍␊
Parameters
serial_number
- 11 decimal digits, factory assigned
Notes
For new products with 14 digit serial numbers, use only the last 11 digits
Command
–
VERSION?
Command Type
– System-mandatory
Command Name
Permission
Transparency
Set:
-
-
-
Get:
VERSION?
End User
-
Description
Syntax
Set:
-
-
Get :
Get version number
#VERSION?
␍
Response
~nn@
VERSION
␠
firmware_version
␍␊
Parameters
firmware_version
– Format: XX.XX.XXXX where the digits group are: major.minor.build version