14
VS-42HN - Operating the VS-42HN 4x2 HDMI Matrix Switcher
6.4
Storing and Recalling a Switching Setting
You can use the STO and RCL buttons to store the current setup and then recall it.
The
VS-42HN
stores only one setting in memory. Storing a new setting
overwrites the previous one.
To store a setting
:
1. Press the STO button.
The STO button illuminates and the:
Currently selected input buttons illuminate
The selected Input buttons in the current configuration flash
For example, if both outputs are currently disconnected, both OFF buttons
will be illuminated and the current setting input buttons (for example, INPUT
1 to OUTPUT 1 and INPUT 3 to OUTPUT 2) flash.
2. Set the machine to the desired setting.
For example, press INPUT SELECTOR button 3 on the TO OUTPUT 1 line
and INPUT SELECTOR button 1 on the TO OUTPUT 2 line.
These buttons flash.
3. Press the STO button again to store the current setup (you have to press the
STO button within 10 seconds, before the store operation times-out).
The STO button no longer illuminates and the current setting is stored in the
non-volatile memory.
To recall a setup
:
1. Press the RCL button.
The RCL button illuminates as well as the current setting input buttons, and
the input buttons of the stored setup flash.
2. Press the RCL button once again to recall the stored setting.
i
