Kramer Electronics Ltd.
VS-211H2
– Overview
4
Defining the VS-211H2 Automatic HDMI Standby
Switcher
This section defines the
VS-211H2
.
Figure 1: VS
‑
211H2 Automatic HDMI Standby Switcher
# Feature
Function
1 ACTIVE INPUT LEDs (1 &
2)
Each LED lights when each input is active,
both LEDs flash when no input is active.
2 PRIORITY LED
Lights when DIP-switch 1 is set to PRIORITY.
3 LAST CONNECTED LED
Lights when DIP-switch 1 is set to LAST CONN.
4 ON LED
Light when power is supplied to the unit.
5 INPUT 1 Connector
Connects to HDMI source 1.
6 INPUT 2 Connector
Connects to HDMI source 2.
7 OUTPUT Connector
Connects to the HDMI acceptor.
8 LAST CONN/PRIORITY
DIP- Switch 1
Set DIP 1 up (OFF) to select the Last Connected input.
Set DIP 1 down (ON) to select the Priority input determined by DIP-
switch 2.
9 DEF 1/DEF 2
DIP-switch 2
Set DIP 2 up (OFF) to make input 1 the default input.
Set DIP 2 down (ON) to make input 2 the default input.
10 REMOTE Terminal Block
Connects to optional contact closure switches 1 & 2 for manual
switching.
11 5V DC Connector
Connects to the 5V DC power supply to power the unit.