Kramer Electronics Ltd.
VS-211H2
– Connecting the VS-211H2
5
Connecting the VS-211H2
Always switch off the power to each device before connecting it to your
VS-211H2
. After
connecting your
VS-211H2
, connect its power and then switch on the power to each
device.
To connect the
VS-211H2
, as illustrated in the example in
Figure 2
, do the following:
1. Connect the INPUT 1 connector to HDMI source 1 (for example, a Blu-ray player).
2. Connect the INPUT 2 connector to HDMI source 2 (for example, a laptop computer
graphics source 4K@60 UHD).
3. Connect the OUTPUT connector to an HDMI acceptor (for example, a
4K@60 UHD projector).
4. If manual switching is needed, connect contact closure (pushbutton) switches to the
REMOTE terminal block see
Connecting the REMOTE Terminal Block
Connector
on page
6
.
Figure 2: Connecting the VS
‑
211H2 Automatic HDMI Standby Switcher
